39" 1H65 Detailed Specifications
| Basic Specifications | 1H65-3 | 1H65-5 | 1H65-8 | 1H65-10 | 1H65-12 |
| Swing over the bed | 39,37 | 39,37 | 39,37 | 39,37 | 39,37 |
| Swing over the carriage | 25.59 | 25.59 | 25.59 | 25.59 | 25.59 |
| Cross slide travel | 27.56 | 27.56 | 27.56 | 27.56 | 27.56 |
| Maximum distance between centers | 118.11 | 196.85 | 314.96 | 393.70 | 472.44 |
| Swing over gap (gap version only) | 55.12 | 55.12 | 55.12 | 55.12 | 55.12 |
| Gap length (gap version only) | 15.35 | 15.35 | 15.35 | 15.35 | 15.35 |
| Diameter of spindle bore | 5.04 | 5.04 | 5.04 | 5.04 | 5.04 |
| Maximum weight of workpiece held between centers, lbs | 17,600 | 17,600 | 17,600 | 22,000 | 22,000 |
| Spindle mount (A-type w/ metric bolts) | 2-15M | 2-15M | 2-15M | 2-15M | 2-15M |
| Pitch of Thread Cut | 1H65-3 | 1H65-5 | 1H65-8 | 1H65-10 | 1H65-12 |
| Metric thread, mm | 1 - 96 | 1 - 96 | 1 - 96 | 1 - 96 | 1 - 96 |
| Inch thread, TPI | 28-0.25 | 28-0.25 | 28-0.25 | 28-0.25 | 28-0.25 |
| Module thread | 0.5 - 24 | 0.5 - 24 | 0.5 - 24 | 0.5 - 24 | 0.5 - 24 |
| RANGE OF FEEDS AND SPEEDS | 1H65-3 | 1H65-5 | 1H65-8 | 1H65-10 | 1H65-12 |
| Range of spindle speeds, RPM |
5-500 |
5-500 |
5-500 |
5-500 |
5-500 |
| Number of spindle speeds |
24 |
24 |
24 |
24 |
24 |
| No of feed rates - |
32 |
32 |
32 |
32 |
32 |
| Feed Rates, inch/rev* | |||||
| - longitudinal |
0.002-0.095 |
0.002-0.095 |
0.002-0.095 |
0.002-0.095 |
0.002-0.095 |
| - cross |
0.0009 - 0.035 |
0.0009 - 0.035 |
0.0009 - 0.035 |
0.0009 - 0.035 |
0.0009 - 0.035 |
| - compound slide |
0.0009 - 0.035 |
0.0009 - 0.035 |
0.0009 - 0.035 |
0.0009 - 0.035 |
0.0009 - 0.035 |
| Rapid traverse speed m/min | |||||
| - longitudinal |
118 |
118 |
118 |
118 |
118 |
| - cross |
40 |
40 |
40 |
40 |
40 |
| Main drive motor power, HP |
31.4 |
31.4 |
31.4 |
31.4 |
31.4 |
| Nominal Voltage (user specifies) |
220 or 440 |
220 or 440 |
220 or 440 |
220 or 440 |
220 or 440 |
*faster feeds up to .762 IPR are available below 63 RPM
| Accuracy (Constancy in diameters of a sample in inches) | 1H65-3 | 1H65-5 | 1H65-8 | 1H65-10 | 1H65-12 |
| -in cross sections | 0.0007 | 0.0007 | 0.0007 | 0.0007 | 0.0007 |
| -in longitudinal sections | 0.0013 | 0.0013 | 0.0013 | 0.0013 | 0.0013 |
| Over length of 12 inches | |||||
| Straightness of face over 12 inches | 0.001 | 0.001 | 0.001 | 0.001 | 0.001 |
| Overall Dimensions | 1H65-3 | 1H65-5 | 1H65-8 | 1H65-10 | 1H65-12 |
| Length | 241.73 | 333.88 | 448.03 | 520.08 | 598.82 |
| Width | 86.61 | 86.61 | 86.61 | 86.61 | 86.61 |
| Height | 69.29 | 69.29 | 69.29 | 69.29 | 69.29 |
| Machine Base Weight, lbs | 28,160 | 34,650 | 39,006 | 44,660 | 51,700 |
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
